Tornado Click-AD

Showing posts with label Fleming’s Right Hand Rule. Show all posts
Showing posts with label Fleming’s Right Hand Rule. Show all posts

Thursday, June 17, 2010

marine Engineering-Electrical-D.C. Generators

D.C. Generators

Operation of a d.c. generator relies (as with alternators) on the principle that when magnetic lines of force are cut by a conductor(Fig. 6.1) a voltage is induced in the conductor. Size of induced voltage and resulting current are dependent on magnetic field strength, length of conductor and speed of cutting.
The direction of current flow is dictated by the relationship between magnetic field and direction of movement of the conductor. Ii can be found from Fleming’s Right Hand Rule, which is applied to give direction of conventional current flow during generation,A simple generator can be constructed from a loop or coil of wire mounted on a spindle and arranged for rotation between opposite magnetic poles The field-cutting action of the straight sides will cause current flow as the result of induced voltage. Direction of flow is shown by the arrows (found from the Right Hand Rule) and can be seen to be continuous around the loop. The voltages generated are in series and therefore add to give twice the voltage produced in one side.
Direct current can be collected from the wire ends through the commutator which consists of two half-rings with brushes. Each brush takes current from one half-ring in turn, so that current flow is always in the same direction f or each collecting brush. The out put is not steady but has a wave form.
The Girl Who Kicked the Hornet's NestLive At The Troubadour [CD / DVD Combo]Kindle Wireless Reading Device (6" Display, Global Wireless, Latest Generation)Avatar (Two-Disc Blu-ray/DVD Combo) [Blu-ray]The Girl with the Dragon Tattoo

Saturday, June 12, 2010

Marine Engine Q & A- Electrical-Alternator

Alternators

The operation of generators relies on the principle that whenever, there is mutual cutting between a conductor and a magnetic field, a voltage and resulting current will be induced in the, conductor. The flow of induced current is not random: it is governed: by the directions of cutting and of the field and can be found from Fleming’s Right Hand Rule (Fig.).
Magnitude of the induced voltage depends on the strength of ‘the magnetic field, rate of cutting and conductor.
Simple Alternator
The arrangement used in the majority of alternators to exploit the principle of generation is shown simply in the sketch. Mutual cutting between conductors and magnetic fields is produced by rotating poles, the magnetic’ fields of which move through fixed conductors.
The rotor shown has a pair of poles so that output is generated simultaneously in two conductors. Reference to the Fleming Right Hand Rule will confirm the instantaneous direction of conventional current indicated by the arrows. The two conductors (R and R1) are connected in series so that the voltages generated in them add together to deliver current to the switchboard. The rotating fields, although moving at constant speed, will cut the conductors at a changing rate because of the circular movement Voltage induced at any instant is proportional to the sine of the angle of the rotating vector. The pattern of build-up and decline, and also reversal in the voltage induced, is shown by the sine wave R.
Powermaster 17294 Alternators - PowerMaster 100 Amp AlternatorDelcochrome,Quality-Built 14129 Premium Alternator - Remanufactured ,Powermaster 17127 Alternators - PowerMaster 65 Amp AlternatorChevychrome,MasterQuality 23156 Premium Remanufactured Alternator,Transformers Hasbro Alternators Optimus Prime Dodge Ram SRT-10
Voltage and current are generated in each of the pairs of conductors in turn—first in one direction and then in the other—to produce three-phase alternating current. The effect in conductors Y and B is also shown.